SC-GSM
Analog phone line simulator, translating Contact ID signals to text format and alarm calls, with 2 independent operating modes

Voice / SMS communicator and GSM Gateway Phone line simulator with additional 2 contact inputs, capable for 2 different operating modes. In Standalone mode the unit behaves like a monitoring station receiver which receives and handles the CONTACT ID communication of alarm control devices.
In Transparent mode fully replaces PSTN phone line. This means that alarm control panel can send the report codes in CID format, or make personal calls to users through this device.

MAIN FEATURES:

  • 2 separate modes of operation in one device
  • PSTN line simulation for monitoring station signal transmission
  • SMS/CALL about 32 different kinds of CONTACT ID reports
  • Signals to 4 telephone numbers
  • 2 contact inputs with independent signals SMS/CALL
  • Handling SIM PIN code
  • Forwarding SMS
  • Setting and diagnostics via USB connection
  • Change settings through SMS message

APPLICATION:

The device made for a secure and quick transfer of Security System’s events to Monitoring Station, through a GPRS IP network. Being an emulator of a classical PSTN line, it is compatible with most security panels on market. In addition, contact inputs can be used to send a fast warning from any device with contact output (watering systems, stand-alone machines, vending machines, panic alarm buttons...) to a monitoring station.
The communicator (stands as a simulated telephone line for the intruder alarm system) receives Contact ID event codes from the intruder alarm system and transmits it via GPRS network to the monitoring station complying with the ANSI/SIA DC-09 standard.

   2 separate operating modes in a single unit
   Phone line simulation for the TIP/RING communicator of the alarm control panel
   Text message and call generation, based on 32 different Contact ID codes
   Notification to 4 user phone numbers
   2 contact inputs with autonomous signaling
   SIM PIN code and device password protection
   Text message forwarding
   Setup and diagnostics over USB connection
   Translating Contact ID signaling to text messages and sending them to mobile phones
   Phone line simulator (gateway)
   Signaling of contact events to phone or monitoring station
User's manual
Securecom GSM remoter software   
Win XP
Win 7
Win 8
Win 10
Cellular BandsGSM (850/ 900/ 1800/ 1900MHz)
Loop current25mA
Power9-30V (DC)
Power consumption (max.)300mA
Power consumption (idle)100mA
Impedance100-470 Ohm
Dial tone425 Hz
Line voltage48V
Operating temperature0 … +70°C