SC-4G      
Remotely manageable alarm monitoring communicators

Operation: the communicator (simulating a landline towards the alarm system) receives the Contact ID report codes from the alarm panel, then forwarding those to the remote monitoring station via the mobile network (in the form of TCP/IP or UDP packets), as it is defined in the SIA DC-09 standard. If sending is successful, the acknowledgement received from the monitoring receiver is signalled to the alarm centre. In the same time it can forward the contact signals received on its own inputs, to the monitoring station.
The unit will turn itself off, if the power supply drops below 10.5V (battery protection).

   IP-based signaling of Contact ID codes to monitoring station
   2G (GPRS) or 4G (LTE) mobile communication
   Serial connection to the alarm control panel
   2 IP receivers can be set up
   Notification logic taken over from the alarm control panel
   Forwarding of CID-based signaling to IP receivers over 2G/4G network
   Remote programming of alarm control panels over the Internet
   Control of alarm control panels and receipt of their signals with mobile application
   Signaling of contact events
   Not necessary to re-set the existing alarm control panel of a new customer
User's manual
Configurator software   
Version: v2.54
Win 7
Win 8
Win 10
   Alarm Over IP
   IoT in signaling technique
Cellular BandsLTE (B1/B3/B7/B8/B20/B28A)
Loop current25mA
Power9-24V DC
Power consumption (max.)1A @ 12V DC
Power consumption (idle)100mA @ 12V DC
Impedance100-470 Ohm
Dial tone425 Hz
Line voltage48V
Operating temperature0 … +70°C