Remotely manageable alarm monitoring communicator with 3G primary and PSTN backup connection

Translates the TIP/RING phone line communication of the alarm control panels, forwards it to the set-up monitoring station, as it is defined in the SIA DC-09 standard. The unit can forward the Contact-ID formatted report codes even parallel to both monitoring station set up, taking over the signaling logic of the alarm control panel. A notification on the event sent to monitoring station, can be sent to the smartphone application, and the smartphone application can control the opening/closing of the alarm control panel, over the contact output, using the IoT server.
Another important feature is that the communicator can be accessed by a web browser, all setup elements can be modified, and the connected alarm control panel settings, statuses and logs can be remotely up- or down loaded (with a remote serial connection, in real time).
Its application is primarily justified at enhanced security level objects (financial institutions, ATM), since the secondary PSTN communication input can be connected not only to a phone line, but also to a line output of a communicator on a mobile or IP network, which doubles the possibility for alternate signaling.

   IP-based signaling of Contact ID codes to monitoring station
   Internet endpoint access (IoT) over the WEB and smartphone
   Serial connection to the alarm control panel
   2 IP receivers can be set up
   Monitoring PSTN line with alternate communication
   Notification logic taken over from the alarm control panel
   Forwarding of CID-based signaling to IP receivers over 2G/3G network
   Remote programming of alarm control panels over the Internet
   Control of alarm control panels and receipt of their signals with mobile application
   Enhanced security level signaling by 3G/PSTN parallel communication
   Signaling of contact events
   Not necessary to re-set the existing alarm control panel of a new customer
User's manual
3G Configurator   
Win 7
Win 8
Win 10
   Operation of the SC-3G GPRS communicator
   Setup of the SC-3G GPRS communicator
   Alarm Over IP
   IoT in signaling technique
Cellular BandsHSPA (800/ 850/ 900/ 1900/ 2100MHz)
Loop current25mA
Power9-24V DC
Power consumption (max.)1A @ 12V DC
Power consumption (idle)100mA @ 12V DC
Max. voltage on relay output60V DC
Max. current on relay output2A
Impedance100-470 Ohm
Dial tone425 Hz
Line voltage48V
Operating temperature0 … +70°C